{"title":"Chassis Upgrades for Axial® SCX30™","description":"","products":[{"product_id":"mofo-rc-pocket-snake-chassis-kit-for-axial®-scx30™-made-in-texas","title":"Mofo RC | Pocket Snake Chassis Kit 2.0 (For Axial® SCX30™) - Made In Texas","description":"\u003cp\u003eThe Pocket Snake 2.0 kit now features replaceable front and rear shock mounts and an upper link riser to divorce the upper links from the skid plate and further enable high clearance lower links. This chassis kit has the same geometry as stock plastic chassis otherwise. Since it is not a one-piece chassis, it provides additional future modularity capabilities not currently available on the stock truck such as rail changes. This chassis is mainly aimed at those looking for additional weight and\/or styling over the stock chassis. All stock components mount right up to the chassis kit.  \u003c\/p\u003e\n\u003cp\u003eThis is part the of the next evolution in the Mofo Chassis System for the Axial® SCX30™ that we are calling the Mofo Chassis System (MCS) 2.0. After extensive testing, we improved upon the modularity of all our chassis kits by integrating the shock holes into the front and rear braces. By doing this, you can now just swap the chassis braces or rails vs only being able to swap the rails. Change your mind and want the extra lift of our Modzilla, you can simply add the \u003ca rel=\"noopener\" title=\"Mofo RC | Replacement Chassis Kit 2.0 Parts (For Axial® SCX30™) - Made In Texas\" href=\"https:\/\/moforc.com\/products\/mofo-rc-replacement-chassis-kit-parts-for-axial%C2%AE-scx30%E2%84%A2-made-in-texas?_pos=6\u0026amp;_sid=a799f6b5b\u0026amp;_ss=r\u0026amp;variant=45492421754937\" target=\"_blank\"\u003eModzilla chassis braces\u003c\/a\u003e to convert. Looking for more skid angle? Buy the Cyber Snake rails (Available Soon). We think this will provide the most customization possible to fit every builder's needs.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStock Skid Angle\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCaptured and swappable upper link mount\n\u003cul\u003e\n\u003cli\u003eDivorces the upper links from the skid plate providing additional anti-squat and clearance over the skid plate mounting.\u003c\/li\u003e\n\u003cli\u003eAdditional anti-squat will provide improved climbing on steep hills due to the less amount of squatting of the rear axle. When the rear axle squats, your front end will lift up, which this setup improves upon over stock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eUpdated front shock holes provides more holes on the top row vs bottom row for improved adjustment.\u003c\/li\u003e\n\u003cli\u003eMCS 2.0 Modularity\u003c\/li\u003e\n\u003cli\u003eMultiple material options\u003c\/li\u003e\n\u003cli\u003eCompatible with stock driveshafts\u003c\/li\u003e\n\u003cli\u003eCompatible with all stock chassis components and bodies. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWeight:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum- 7g (Stock Weight)\u003c\/li\u003e\n\u003cli\u003eBrass- 11g (5g heavier than stock)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIncludes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x Front brace\u003c\/li\u003e\n\u003cli\u003e1x Rear brace\u003c\/li\u003e\n\u003cli\u003e1x Pocket Snake Rear Upper Link Mount\u003c\/li\u003e\n\u003cli\u003e2x Stock Angle frame rails (Pocket Snake\/Modzilla)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eM1 \u0026amp; M1.4 Hardware\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/moforc.com\/products\/mofo-rc-replacement-chassis-kit-parts-for-axial%C2%AE-scx30%E2%84%A2-made-in-texas?_pos=6\u0026amp;_sid=a799f6b5b\u0026amp;_ss=r\u0026amp;variant=45492421754937\" title=\"Mofo RC | Replacement Chassis Kit 2.0 Parts (For Axial® SCX30™) - Made In Texas\" rel=\"noopener\" target=\"_blank\"\u003eReplacement Parts (Version 2)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/moforc.com\/products\/mofo-rc-replacement-chassis-kit-braces-for-axial%C2%AE-scx30%E2%84%A2-made-in-texas?_pos=4\u0026amp;_psq=replacement\u0026amp;_ss=e\u0026amp;_v=1.0\" title=\"Mofo RC | Replacement Chassis Kit 1.0 Braces (For Axial® SCX30™) - Made In Texas\" rel=\"noopener\" target=\"_blank\"\u003eReplacement Parts (Version 1 - Metal Shock Holes)\u003c\/a\u003e\u003c\/p\u003e","brand":"Mofo Rc","offers":[{"title":"Aluminum","offer_id":45159476887609,"sku":"779","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Brass","offer_id":45159476854841,"sku":"780","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/3922\/3865\/files\/mofo_rc_scx30_chassis_pocketsnake-7.jpg?v=1772832382"},{"product_id":"mofo-rc-737-modzilla-chassis-kit-for-axial®-scx30™-made-in-texas","title":"Mofo RC | 737 Modzilla Chassis Kit 2.0 (For Axial® SCX30™) - Made In Texas","description":"\u003cp\u003eThe 737 Modzilla 2.0 kit now features replaceable front and rear shock mounts and an upper link riser to divorce the upper links from the skid plate and further enable high clearance lower links. This chassis kit has +7mm lift compared to the stock plastic chassis in order to clear larger 0.7\" tires without trimming\/removing fenders or for custom lifted builds. Since it is not a one-piece chassis, it provides additional modularity capabilities not currently available on the stock truck. All stock components mount right up to the chassis kit.  We sell a variety of \u003ca href=\"https:\/\/moforc.com\/collections\/7-tires\" title='RC4WD 0.7\" Tires' rel=\"noopener noreferrer\" target=\"_blank\"\u003e0.7\" tires\u003c\/a\u003e from RC4WD.\u003c\/p\u003e\n\u003cp\u003eThis is part the of the next evolution in the Mofo Chassis System for the Axial® SCX30™ that we are calling the Mofo Chassis System (MCS) 2.0. After extensive testing, we improved upon the modularity of all our chassis kits by integrating the shock holes into the front and rear braces. By doing this, you can now just swap the chassis braces or rails vs only being able to swap the rails. Change your mind and want the stock height of our Pocket Snake, you can simply add the \u003ca href=\"https:\/\/moforc.com\/products\/mofo-rc-replacement-chassis-kit-parts-for-axial%C2%AE-scx30%E2%84%A2-made-in-texas?_pos=6\u0026amp;_sid=a799f6b5b\u0026amp;_ss=r\u0026amp;variant=45492421754937\" title=\"Mofo RC | Replacement Chassis Kit 2.0 Parts (For Axial® SCX30™) - Made In Texas\" rel=\"noopener\" target=\"_blank\"\u003ePocket Snake standard chassis braces\u003c\/a\u003e to convert. Looking for more skid angle? Buy the Cyber Snake rails (Available Soon). We think this will provide the most customization possible to fit every builder's needs.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+7mm Chassis Lift\u003c\/li\u003e\n\u003cli\u003eStock Skid Angle\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCaptured and swappable upper link mount\n\u003cul\u003e\n\u003cli\u003eDivorces the upper links from the skid plate providing additional anti-squat and clearance over the skid plate mounting.\u003c\/li\u003e\n\u003cli\u003eAdditional anti-squat will provide improved climbing on steep hills due to the less amount of squatting of the rear axle. When the rear axle squats, your front end will lift up, which this setup improves upon over stock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eUpdated front shock holes provides more holes on the top row vs bottom row for improved adjustment.\u003c\/li\u003e\n\u003cli\u003eMCS 2.0 Modularity\u003c\/li\u003e\n\u003cli\u003eMultiple material options\u003c\/li\u003e\n\u003cli\u003eCompatible with stock driveshafts\u003c\/li\u003e\n\u003cli\u003eCompatible with all stock chassis components and bodies. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWeight:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum- 7g (Stock Weight)\u003c\/li\u003e\n\u003cli\u003eBrass- 11g (5g heavier than stock)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIncludes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x Front brace\u003c\/li\u003e\n\u003cli\u003e1x Rear brace\u003c\/li\u003e\n\u003cli\u003e1x Pocket Snake Rear Upper Link Mount\u003c\/li\u003e\n\u003cli\u003e2x Stock Angle frame rails (Pocket Snake\/Modzilla)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eM1 \u0026amp; M1.4 Hardware\u003c\/li\u003e\n\u003cli\u003eCombo Only: 4x \u003ca rel=\"noopener noreferrer\" title='Mofo RC 0.7\" Weighted Wheels for SCX30' href=\"https:\/\/moforc.com\/products\/mofo-rc-0-7-wheels-for-axial%C2%AE-scx30%E2%84%A2-made-in-texas\" target=\"_blank\"\u003e0.7\" Weighted Wheels\u003c\/a\u003e with matching wheel weights \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/moforc.com\/products\/mofo-rc-replacement-chassis-kit-parts-for-axial%C2%AE-scx30%E2%84%A2-made-in-texas?_pos=6\u0026amp;_sid=a799f6b5b\u0026amp;_ss=r\u0026amp;variant=45492421754937\" title=\"Mofo RC | Replacement Chassis Kit 2.0 Parts (For Axial® SCX30™) - Made In Texas\" rel=\"noopener\" target=\"_blank\"\u003eReplacement Parts (Version 2)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/moforc.com\/products\/mofo-rc-replacement-chassis-kit-braces-for-axial%C2%AE-scx30%E2%84%A2-made-in-texas?_pos=4\u0026amp;_psq=replacement\u0026amp;_ss=e\u0026amp;_v=1.0\" title=\"Mofo RC | Replacement Chassis Kit 1.0 Braces (For Axial® SCX30™) - Made In Texas\" rel=\"noopener\" target=\"_blank\"\u003eReplacement Parts (Version 1 - Metal Shock Holes)\u003c\/a\u003e\u003c\/p\u003e","brand":"Mofo Rc","offers":[{"title":"Aluminum \/ With Weighted Wheels","offer_id":45159482949689,"sku":"775","price":42.99,"currency_code":"USD","in_stock":false},{"title":"Aluminum \/ No Wheels","offer_id":45186191458361,"sku":"776","price":24.99,"currency_code":"USD","in_stock":false},{"title":"Brass \/ With Weighted Wheels","offer_id":45159482982457,"sku":"777","price":44.99,"currency_code":"USD","in_stock":true},{"title":"Brass \/ No Wheels","offer_id":45186191491129,"sku":"778","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/3922\/3865\/files\/Mofo_rc_scx30_modzilla_chassis-9.jpg?v=1772832759"},{"product_id":"mofo-rc-brass-rear-axle-weight-for-axial®-scx30™","title":"Mofo RC | Brass Rear Axle Weight (For Axial® SCX30™)","description":"\u003cp\u003eAdd an additional 8.4g of weight to your rear axle with these brass axle weights.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4.2g of weight per side\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 x Brass Weights\u003c\/li\u003e\n\u003cli\u003eM1 Screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mofo Rc","offers":[{"title":"Default Title","offer_id":45866028138553,"sku":"785","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/3922\/3865\/files\/Mofo_rc_upgrade_-4.jpg?v=1771884479"},{"product_id":"mofo-rc-replacement-chassis-kit-braces-for-axial®-scx30™-made-in-texas","title":"Mofo RC | Replacement Chassis Kit 1.0 Braces (For Axial® SCX30™) - Made In Texas","description":"\u003cp\u003eThese are replacement nylon chassis braces for our Pocket Snake and Modzilla 1.0 chassis kits. They are not compatible with the stock chassis.\u003c\/p\u003e\n\u003cp\u003eThese are NOT compatible with the Cyber Snake or Piranha.\u003c\/p\u003e","brand":"Mofo Rc","offers":[{"title":"Front Brace","offer_id":45866749853753,"sku":"773","price":3.99,"currency_code":"USD","in_stock":true},{"title":"Rear Brace","offer_id":45866749886521,"sku":"774","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/3922\/3865\/files\/mofo_rc_scx30_replacement_parts-2.jpg?v=1767973089"},{"product_id":"mofo-rc-cyber-snake-chassis-kit-for-axial®-scx30™-made-in-texas","title":"Mofo RC | Cyber Snake Comp Chassis Kit (For Axial® SCX30™) - Made In Texas","description":"\u003cp\u003eWith a 15 degree skid angle and a modular length adjustment, the Cyber Snake is the best comp chassis to take your Axial® SCX30™ to the next level. Building a full comp chassis? Buy with our +6mm lower links set for that extra length you always wanted. Want to run a stock body? No problem, you can use stock length links as well.\u003c\/p\u003e\n\u003cp\u003eThis is the next evolution in the Mofo Chassis System for the Axial® SCX30™ that we are calling the Mofo Chassis System (MCS) 2.0. After extensive testing, we improved upon the modularity of all our chassis kits by integrating the shock holes into the front and rear braces. By doing this, you can now just swap the chassis braces or rails vs only being able to swap the rails. Want the extra lift of our Modzilla, but more skid angle, yyou can simply add the \u003ca rel=\"noopener\" title=\"Mofo RC | Replacement Chassis Kit 2.0 Parts (For Axial® SCX30™) - Made In Texas\" href=\"https:\/\/moforc.com\/products\/mofo-rc-replacement-chassis-kit-parts-for-axial%C2%AE-scx30%E2%84%A2-made-in-texas?_pos=6\u0026amp;_sid=a799f6b5b\u0026amp;_ss=r\u0026amp;variant=45492421754937\" target=\"_blank\"\u003eModzilla chassis braces\u003c\/a\u003e to convert. Competition rules require stock skid angle? Buy the Pocket Snake rails (Available Soon). We think this will provide the most customization possible to fit every builder's needs.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e15* Skid Angle\u003c\/li\u003e\n\u003cli\u003eCaptured and swappable upper link mount\n\u003cul\u003e\n\u003cli\u003eDivorces the upper links from the skid plate providing additional anti-squat and clearance over the skid plate mounting.\u003c\/li\u003e\n\u003cli\u003eAdditional anti-squat will provide improved climbing on steep hills due to the less amount of squatting of the rear axle. When the rear axle squats, your front end will lift up, which this setup improves upon over stock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e0 or +6mm Longer Link Option\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with stock-sized lower links or Mofo RC +6mm lower link set.\u003c\/li\u003e\n\u003cli\u003eUtilizes stock length upper links.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eUpdated front shock holes provides more holes on the top row vs bottom row for improved adjustment.\u003c\/li\u003e\n\u003cli\u003eMCS 2.0 Modularity\u003c\/li\u003e\n\u003cli\u003eMultiple material options\u003c\/li\u003e\n\u003cli\u003eCompatible with stock driveshafts\u003c\/li\u003e\n\u003cli\u003eCompatible with all stock chassis components and bodies. Trimming may be necessary when using extended links.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWeight:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTitanium- 8g (3g heavier than stock)\u003c\/li\u003e\n\u003cli\u003eBrass- 11g (5g heaver than stock)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIncludes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x Front 2.0 Brace\u003c\/li\u003e\n\u003cli\u003e1x Rear 2.0 Brace with swappable captured upper link mounts \u003c\/li\u003e\n\u003cli\u003e1x Stock length captured upper link mount (long arms)\u003c\/li\u003e\n\u003cli\u003e1x +6mm length captured upper link mount (short arms)\u003c\/li\u003e\n\u003cli\u003e2x Cyber Snake Frame rails\u003c\/li\u003e\n\u003cli\u003eM1 \u0026amp; M1.4 Hardware\u003c\/li\u003e\n\u003cli\u003eOptional: +6mm Front\/Rear Lower Link Set in matching material.\n\u003cul\u003e\n\u003cli\u003e2x Front Lower Links\u003c\/li\u003e\n\u003cli\u003e2x +6mm Rear Lower Links\u003c\/li\u003e\n\u003cli\u003eO-rings for additional link support if desired\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eLinks utilize stock link balls, not included. \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/moforc.com\/products\/mofo-rc-replacement-chassis-kit-parts-for-axial%C2%AE-scx30%E2%84%A2-made-in-texas?_pos=6\u0026amp;_sid=a799f6b5b\u0026amp;_ss=r\u0026amp;variant=45492421754937\" title=\"Mofo RC | Replacement Chassis Kit 2.0 Parts (For Axial® SCX30™) - Made In Texas\" rel=\"noopener\" target=\"_blank\"\u003eReplacement Parts\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eNote: We've done our best to try various link combinations and there are plenty of clearances for different link setups to the best of our knowledge.\u003c\/p\u003e","brand":"Mofo Rc","offers":[{"title":"Brass \/ Chassis Only","offer_id":45458606325817,"sku":"795","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Brass \/ With +6mm Lower Link Set","offer_id":45458631491641,"sku":"797","price":44.99,"currency_code":"USD","in_stock":true},{"title":"Titanium \/ Chassis Only","offer_id":45458631524409,"sku":"796","price":44.99,"currency_code":"USD","in_stock":true},{"title":"Titanium \/ With +6mm Lower Link Set","offer_id":45458631557177,"sku":"798","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/3922\/3865\/files\/Mofo_rc_scx30_chassis_kit_-31_1.jpg?v=1770838027"},{"product_id":"mofo-rc-piranha-caged-comp-chassis-kit-for-axial®-scx30™-made-in-texas","title":"Mofo RC | Piranha Caged Comp Chassis Kit (For Axial® SCX30™) - Made In Texas","description":"\u003cp\u003eWith a 15 degree skid angle and a modular length adjustment, the Piranha is a fully caged comp chassis for your Axial® SCX30™. Intended to run without a body, you get that cool caged look that many of you look for in larger SCX24 kits.\u003c\/p\u003e\n\u003cp\u003eThe Piranha uses the next evolution in the Mofo Chassis System for the Axial® SCX30™ that we are calling the Mofo Chassis System (MCS) 2.0. After extensive testing, we improved upon the modularity of all our chassis kits by integrating the shock holes into the front and rear braces. By doing this, you can now just swap the chassis braces or rails vs only being able to swap the rails. Want to run a body in the future, buy the Cyber Snake Rails, (Available Soon). Competition rules require stock skid angle, buy the Pocket Snake rails (Available Soon). We think this will provide the most customization possible to fit every builder's needs.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCaged Chassis - \u003cspan style=\"text-decoration: underline;\"\u003eNot compatible with stock bodies without trimming\/clearancing\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e15* Skid Angle\u003c\/li\u003e\n\u003cli\u003eCaptured and swappable upper link mount\n\u003cul\u003e\n\u003cli\u003eDivorces the upper links from the skid plate providing additional anti-squat and clearance over the skid plate mounting.\u003c\/li\u003e\n\u003cli\u003eAdditional anti-squat will provide improved climbing on steep hills due to the less amount of squatting of the rear axle. When the rear axle squats, your front end will lift up, which this setup improves upon over stock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e0 or +6mm Longer Link Option\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with stock-sized lower links or Mofo RC +6mm lower link set.\u003c\/li\u003e\n\u003cli\u003eUtilizes stock length upper links.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eUpdated front shock holes provides more holes on the top row vs bottom row for improved adjustment.\u003c\/li\u003e\n\u003cli\u003eMCS 2.0 Modularity\u003c\/li\u003e\n\u003cli\u003eMultiple material options\u003c\/li\u003e\n\u003cli\u003eCompatible with stock driveshafts\u003c\/li\u003e\n\u003cli\u003eCompatible with all stock chassis components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWeight:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTitanium- 12g (6g heavier than stock)\u003c\/li\u003e\n\u003cli\u003eBrass- 17g (11g heavier than stock)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIncludes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x Front 2.0 Brace\u003c\/li\u003e\n\u003cli\u003e1x Rear 2.0 Brace with swappable captured upper link mounts\u003c\/li\u003e\n\u003cli\u003e1x Stock length captured upper link mount\u003c\/li\u003e\n\u003cli\u003e1x +6mm length captured upper link mount\u003c\/li\u003e\n\u003cli\u003e1x Piranha top brace\u003c\/li\u003e\n\u003cli\u003e2x Piranha Frame rails\u003c\/li\u003e\n\u003cli\u003eM1 \u0026amp; M1.4 Hardware\u003c\/li\u003e\n\u003cli\u003eOptional: +6mm Front\/Rear Lower Link Set in matching material.\n\u003cul\u003e\n\u003cli\u003e2x Front Lower Links\u003c\/li\u003e\n\u003cli\u003e2x +6mm Rear Lower Links\u003c\/li\u003e\n\u003cli\u003eO-rings for additional link support if desired\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eLinks utilize stock link balls, not included. \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca rel=\"noopener\" title=\"Mofo RC | Replacement Chassis Kit 2.0 Parts (For Axial® SCX30™) - Made In Texas\" href=\"https:\/\/moforc.com\/products\/mofo-rc-replacement-chassis-kit-parts-for-axial%C2%AE-scx30%E2%84%A2-made-in-texas?_pos=6\u0026amp;_sid=a799f6b5b\u0026amp;_ss=r\u0026amp;variant=45492421754937\" target=\"_blank\"\u003eReplacement Parts\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNote: We've done our best to try various link combinations and there are plenty of clearances for different link setups to the best of our knowledge.\u003c\/p\u003e","brand":"Mofo Rc","offers":[{"title":"Brass \/ Chassis Only","offer_id":45458686476345,"sku":"799","price":39.99,"currency_code":"USD","in_stock":false},{"title":"Brass \/ With +6mm Lower Link Set","offer_id":45458686509113,"sku":"801","price":49.99,"currency_code":"USD","in_stock":false},{"title":"Titanium \/ Chassis Only","offer_id":45458686541881,"sku":"800","price":49.99,"currency_code":"USD","in_stock":false},{"title":"Titanium \/ With +6mm Lower Link Set","offer_id":45458686574649,"sku":"802","price":64.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/3922\/3865\/files\/Mofo_rc_scx30_chassis_kit_-16.jpg?v=1770837724"},{"product_id":"mofo-rc-replacement-chassis-kit-parts-for-axial®-scx30™-made-in-texas","title":"Mofo RC | Replacement Chassis Kit 2.0 Parts (For Axial® SCX30™) - Made In Texas","description":"\u003cp\u003eThese are replacement nylon chassis components for our SCX30 chassis kits using the new MCS, Modular Chassis System 2.0. \u003cspan style=\"text-decoration: underline;\"\u003eAs of 4\/10\/26, the braces have been thickened to increase durability and now come with magnet holes for those that wish to use a magnetic body setup. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn general, all shock mounts are cross compatible if you want to mix and match shock setups. Parts compatibility is based on the chassis rails you are using.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStandard Braces\/Shock Mount - Now includes \u003ca title=\"Mofo RC | Body Magnets (6mm x 1.4mm)\" href=\"https:\/\/moforc.com\/products\/mofo-rc-body-magnets-6mm-x-1-4mm-pack-of-10\" target=\"_blank\"\u003e6mm x 1.4mm Magnet\u003c\/a\u003e Holes\n\u003cul\u003e\n\u003cli\u003eStock mounts for all kits excluding Modzilla (optional)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e+7mm Lift Braces\/Shock Mounts- Now includes \u003ca href=\"https:\/\/moforc.com\/products\/mofo-rc-body-magnets-6mm-x-1-4mm-pack-of-10\" target=\"_blank\" title=\"Mofo RC | Body Magnets (6mm x 1.4mm)\" rel=\"noopener\"\u003e6mm x 1.4mm Magnet\u003c\/a\u003e Holes\n\u003cul\u003e\n\u003cli\u003eModzilla stock. Optional for all kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e+6mm Upper Link Mount Insert\n\u003cul\u003e\n\u003cli\u003eCyber Snake \u0026amp; Piranha only for use with +6mm lower link set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCyber Snake Upper Link Mount Insert\n\u003cul\u003e\n\u003cli\u003eCyber Snake \u0026amp; Piranha chassis rails only for use with stock length links\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePocket Snake Upper Link Mount Insert\n\u003cul\u003e\n\u003cli\u003ePocket Snake 2.0 \u0026amp; Modzilla 2.0 chassis rails only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mofo Rc","offers":[{"title":"Front Brace","offer_id":45866735370297,"sku":"861","price":3.99,"currency_code":"USD","in_stock":true},{"title":"Rear Brace","offer_id":45866735403065,"sku":"862","price":3.99,"currency_code":"USD","in_stock":true},{"title":"Front +7mm Brace","offer_id":45866735435833,"sku":"863","price":3.99,"currency_code":"USD","in_stock":true},{"title":"Rear +7mm Brace","offer_id":45866735468601,"sku":"864","price":3.99,"currency_code":"USD","in_stock":true},{"title":"+6mm Upper Link Mount Insert","offer_id":45866735501369,"sku":"865","price":2.99,"currency_code":"USD","in_stock":true},{"title":"Cyber Snake Upper Link Mount Insert","offer_id":45866735534137,"sku":"866","price":2.99,"currency_code":"USD","in_stock":true},{"title":"Pocket Snake Upper Link Mount Insert","offer_id":45866735566905,"sku":"867","price":2.99,"currency_code":"USD","in_stock":true},{"title":"Piranha Top Brace","offer_id":45866738319417,"sku":"868","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/3922\/3865\/files\/mofo_rc_replacement_chassis_parts_2.0-01.jpg?v=1772750526"},{"product_id":"mofo-rc-6mm-lower-link-set-for-axial®-scx30™-made-in-texas","title":"Mofo RC | Replacement +6mm Lower Link Set (For Axial® SCX30™) - Made In Texas","description":"\u003cp\u003eThese are replacement +6mm lower links for our Piranha and Cyber Snake chassis kits. \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eThey will not work on a stock chassis\u003c\/strong\u003e\u003c\/span\u003e without a custom upper link mount and are only intended for those that did not get the chassis kit with the extended links included. You can simply use any stock-sized upper link.\u003c\/p\u003e\n\u003cp\u003eWeight:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTitanium- 4.2g\u003c\/li\u003e\n\u003cli\u003eBrass- 6.8g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIncludes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 Front Lower Links\u003c\/li\u003e\n\u003cli\u003e2 +6mm Rear Lower Links\u003c\/li\u003e\n\u003cli\u003eO-rings\u003c\/li\u003e\n\u003cli\u003eNote: Requires stock link balls\/ball studs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstall: When installing these onto a Cyber Snake or Piranha chassis, you must use the +6mm Link Riser insert (Short). Remove the front stock link and ball studs. The small link balls will need to be removed from the skid plate side.  BE VERY CAREFUL. These are extremely small. It’s easiest to grab both sides with needle nose pliers and carefully push the plastic off.  Install this side and then move to the axle side. The links are intentionally a tight fit so take your time.  Install the axle side by removing the shock bottom and the ball stud if needed.  It it easier to start with the axle side on the rear so you don’t have to unscrew the ball stud. \u003c\/p\u003e\n\u003cp\u003eNotes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAn o-ring can be added on one side to remove the minimal play you may experience in the links or to gain extra clearances with some shock positions. It isn't necessary given the small size, but may be helpful to some.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBrass naturally tarnishes over time. They can easily be cleaned or polished for those looking for an updated appearance. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Mofo Rc","offers":[{"title":"Brass","offer_id":45547952537657,"sku":"828","price":14.99,"currency_code":"USD","in_stock":false},{"title":"Titanium","offer_id":45547966070841,"sku":"830","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/3922\/3865\/files\/Mofo_rc_scx24_upgrades-24.jpg?v=1770332321"}],"url":"https:\/\/moforc.com\/collections\/chassis-upgrades-for-axial%c2%ae-scx30%e2%84%a2.oembed","provider":"Mofo Rc","version":"1.0","type":"link"}