{"title":"Suspension Upgrades for Axial® SCX30™","description":"","products":[{"product_id":"scx30-lower-link-set","title":"Lower Link Set for Axial® SCX30™ - Made In Texas","description":"\u003cp\u003eThe Mofo RC lower link set provides higher rear clearance than stock and additional weight options for those looking for additional weight down low. These links utilize the stock link balls. \u003c\/p\u003e\n\u003cp\u003eWeight:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum- 2g\u003c\/li\u003e\n\u003cli\u003eBrass- 6g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIncludes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 Front Lower Links\u003c\/li\u003e\n\u003cli\u003e2 Rear Lower Links\u003c\/li\u003e\n\u003cli\u003eO-rings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstall: Remove the front stock link and ball studs. The small link balls will need to be removed from the skid plate side.  BE VERY CAREFUL. These are extremely small. It’s easiest to grab both sides with needle nose pliers and carefully push the plastic off.  Install this side and then move to the axle side. The links are intentionally a tight fit so take your time.  Install the axle side by removing the shock bottom and the ball stud if needed.  It it easier to start with the axle side on the rear so you don’t have to unscrew the ball stud. Move the stock upper plastic rear links to the top ball stud on the axle side. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eYou’ll need to move the rear upper links to the top ball on the ball stud.\u003c\/p\u003e\n\u003cp\u003eNotes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAn o-ring can be added on one side to remove the minimal play you may experience in the links or to gain extra clearances with some shock positions. It isn't necessary given the small size, but may be helpful to some.\u003c\/li\u003e\n\u003cli\u003eWe do not recommend you run the shocks on the forward most hole in the rear. You may experience binding if you use these positions since these links provide the most ground clearance possible on a stock suspension setup.\u003c\/li\u003e\n\u003cli\u003eBrass naturally tarnishes over time. They can easily be cleaned or polished for those looking for an updated appearance. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Mofo RC","offers":[{"title":"Aluminum","offer_id":45178342473785,"sku":"771","price":9.99,"currency_code":"USD","in_stock":false},{"title":"Brass","offer_id":45178342506553,"sku":"772","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/3922\/3865\/files\/Mofo_rc_scx24_upgrades-24.jpg?v=1770332321"},{"product_id":"mofo-rc-brass-steering-knuckle-for-axial®-scx30™","title":"Mofo RC | Brass Steering Knuckle (For Axial® SCX30™)","description":"\u003cp\u003eThese are brass stock replacement knuckles.\u003c\/p\u003e\n\u003cp\u003eWeight: 3g each (+2.5g over stock)\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 x Knuckles\u003c\/li\u003e\n\u003cli\u003e4 x Bearings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mofo Rc","offers":[{"title":"Default Title","offer_id":45866027876409,"sku":"781","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/3922\/3865\/files\/mofo_rc_scx30_upgrades-2_bcee6cf1-3660-438d-8203-2f71fa11afba.jpg?v=1767047214"},{"product_id":"mofo-rc-aluminum-upper-lower-link-set-for-axial®-scx30™","title":"Mofo RC | Machined Upper \u0026 Lower Link Set (For Axial® SCX30™)","description":"\u003cp\u003eAdd these machined upper and lower link sets to your Axial® SCX30™ for increased rigidity over stock links.\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrass or Aluminum Upper \u0026amp; Lower Links\u003c\/li\u003e\n\u003cli\u003eM1 Hardware for skid plate mounting\u003c\/li\u003e\n\u003cli\u003eM1.4 Hardware for axle side mounting\u003c\/li\u003e\n\u003cli\u003eM1 Link Balls\u003c\/li\u003e\n\u003cli\u003eM1.4 Link Balls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWeight:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum: ~6g\u003c\/li\u003e\n\u003cli\u003eBrass: ~15g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstallation Notes:\u003c\/p\u003e\n\u003cp\u003eYou will utilize the included link balls for the bottom of the shocks and upper link mounts on the axle vs the stock link balls. They will snap in. If you need to raise the upper link to the second link ball on the rear axle, use 2 link balls stacked with the flanged part on top.\u003c\/p\u003e","brand":"Mofo Rc","offers":[{"title":"Aluminum","offer_id":45320557559865,"sku":"807","price":19.99,"currency_code":"USD","in_stock":true},{"title":"Brass","offer_id":45320557592633,"sku":"809","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/3922\/3865\/files\/Mofo_rc_scx30_upgrade_aluminumlinks_807-2.jpg?v=1772214901"},{"product_id":"scx30-brass-rear-axle-weight","title":"Mofo RC | Brass Rear Axle Weight for Axial® SCX30™","description":"\u003cp\u003eAdd an additional 8.4g of weight to your rear axle with these brass axle weights.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4.2g of weight per side\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 x Brass Weights\u003c\/li\u003e\n\u003cli\u003eM1 Screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mofo RC","offers":[{"title":"Default Title","offer_id":45866028138553,"sku":"785","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/3922\/3865\/files\/Mofo_rc_upgrade_-4.jpg?v=1771884479"},{"product_id":"mofo-rc-27mm-aluminum-shocks-for-axial®-scx30™","title":"Mofo RC | Premium 27mm Aluminum Shocks (For Axial® SCX30™)","description":"\u003cp\u003eThese premium 27mm aluminum shocks are a great way to add improved dampening and travel to your Axial® SCX30™. Using a light grease internally, these shocks provide a super smooth operation to your suspension over stock shocks.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSmooth, silky operation\u003c\/li\u003e\n\u003cli\u003eAluminum threaded shock body\u003c\/li\u003e\n\u003cli\u003eAluminum caps, spring retainer, and shock end\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSilicon grease-filled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 x Shocks\u003c\/li\u003e\n\u003cli\u003e1 x Soft Spring Set\u003c\/li\u003e\n\u003cli\u003e1 x Hard Spring Set\u003c\/li\u003e\n\u003cli\u003eM1.4 Screws\u003c\/li\u003e\n\u003cli\u003eShock Balls\u003c\/li\u003e\n\u003cli\u003eShock Spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstallation Note: If you experience any binding under compression from full droop, you may need to adjust your shock angle by moving the top of the shock in or out further from the chassis.\u003c\/p\u003e\n\u003cp\u003eNote: These are not compatible with the stock link balls. You must use the included ones along with the screw to mount to your axle.\u003c\/p\u003e","brand":"Mofo Rc","offers":[{"title":"Bronze Cap\/Black Body","offer_id":45889673887801,"sku":"784","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":45889673920569,"sku":"784-Black","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":45889673953337,"sku":"784-Silver","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Gold Cap\/Silver Body","offer_id":45889673986105,"sku":"784-Gold","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/3922\/3865\/files\/mofo_rc_scx30_shocks-bronze.jpg?v=1779912714"},{"product_id":"scx30-bearing-kit","title":"Mofo RC | Full Bearing Kit for Axial® SCX30™","description":"\u003cp\u003eThis is a full 20 piece bearing kit for the Axial® SCX30™ axles and transmission.\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e12 x 3x6x2mm\u003c\/li\u003e\n\u003cli\u003e4 x 3x6x2.5mm\u003c\/li\u003e\n\u003cli\u003e4 x 2x5x2.5mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mofo RC","offers":[{"title":"Default Title","offer_id":45866025615417,"sku":"758","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/3922\/3865\/files\/Mofo_rc_scx30_upgrades-3_0784a7ec-3fe5-488e-ae84-61cb1c18b270.jpg?v=1770414188"},{"product_id":"mofo-rc-6mm-lower-link-set-for-axial®-scx30™-made-in-texas","title":"Mofo RC | Replacement +6mm Lower Link Set (For Axial® SCX30™) - Made In Texas","description":"\u003cp\u003eThese are replacement +6mm lower links for our Piranha and Cyber Snake chassis kits. \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eThey will not work on a stock chassis\u003c\/strong\u003e\u003c\/span\u003e without a custom upper link mount and are only intended for those that did not get the chassis kit with the extended links included. You can simply use any stock-sized upper link.\u003c\/p\u003e\n\u003cp\u003eWeight:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTitanium- 4.2g\u003c\/li\u003e\n\u003cli\u003eBrass- 6.8g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIncludes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 Front Lower Links\u003c\/li\u003e\n\u003cli\u003e2 +6mm Rear Lower Links\u003c\/li\u003e\n\u003cli\u003eO-rings\u003c\/li\u003e\n\u003cli\u003eNote: Requires stock link balls\/ball studs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstall: When installing these onto a Cyber Snake or Piranha chassis, you must use the +6mm Link Riser insert (Short). Remove the front stock link and ball studs. The small link balls will need to be removed from the skid plate side.  BE VERY CAREFUL. These are extremely small. It’s easiest to grab both sides with needle nose pliers and carefully push the plastic off.  Install this side and then move to the axle side. The links are intentionally a tight fit so take your time.  Install the axle side by removing the shock bottom and the ball stud if needed.  It it easier to start with the axle side on the rear so you don’t have to unscrew the ball stud. \u003c\/p\u003e\n\u003cp\u003eNotes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAn o-ring can be added on one side to remove the minimal play you may experience in the links or to gain extra clearances with some shock positions. It isn't necessary given the small size, but may be helpful to some.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBrass naturally tarnishes over time. They can easily be cleaned or polished for those looking for an updated appearance. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Mofo Rc","offers":[{"title":"Brass","offer_id":45547952537657,"sku":"828","price":14.99,"currency_code":"USD","in_stock":false},{"title":"Titanium","offer_id":45547966070841,"sku":"830","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/3922\/3865\/files\/Mofo_rc_scx24_upgrades-24.jpg?v=1770332321"},{"product_id":"scx30-machined-aluminum-upper-link-set","title":"Mofo RC | Machined Lightweight Aluminum Upper Link Set for Axial® SCX30™","description":"\u003cp\u003eThese are machined aluminum upper link sets for use with our lower link sets. They are stock length and are a great option for those building a truck from the ground up. They are perfect for use with our +6mm link sets when building a Cyber Snake or Piranha.\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2x Front Upper Links\u003c\/li\u003e\n\u003cli\u003e2x Rear Upper Links\u003c\/li\u003e\n\u003cli\u003eHardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWeight: 2g\u003c\/p\u003e","brand":"Mofo RC","offers":[{"title":"Default Title","offer_id":45866025877561,"sku":"827","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/3922\/3865\/files\/mofo_rc_scx30_lightweight_links.jpg?v=1775572897"}],"url":"https:\/\/moforc.com\/collections\/suspension-upgrades-for-scx30.oembed","provider":"Mofo Rc","version":"1.0","type":"link"}