Mini Wild XT Chassis for 24th scale Axial

Mini Wild XT Extended Chassis is a high clearance competition style chassis designed around our pancake brushless motors. Mini Wild XT is 10mm longer than Mini Wild with a 10mm longer wheelbase. And a bearing carrier with raised 2 piece rear driveshaft.  This chassis is designed for ease of use and budget in mind it works great with stock shocks or stock length aftermarket shocks. You can use longer shocks at your own tuning ability. Feel free to get wild with it. 

This is a super easy to build kit that includes the following.

• Lower Frame rails and Upper protection support rails.
• ESC / Carrier Tray and Battery Tray both chassis mounted
• Motor protection cover plate
  
• Suspension link set

Required Components

• Electronics

  • Brushless Motor: Mofo RC | SMP, MVP, ROP Pancake Motors
  • ESC: Mofo RC | Rockwolf Brushed/Brushless ESC
  • Servo: Mofo RC | Black Label 2.0, Servo Beast

• Chassis Components

  • Transmission: Mofo RC | Aluminum/Brass Bulletproof Transmission
  • Driveshafts:
    • 2x 32.5-40mm
    • 1x 40-52mm
  • Carrier Bearing Components:
    • 2x 8mm x 4mm x3mm bearings
      • Standard lower shaft bearings
      • Stock transmission lower shaft (not included)
  • Axles: Mofo RC X15s, Mofo RC 44s
  • Shocks: ~40-52mm
    • Note shorter shocks may require adjustment for driveshaft/motor clearances
  • You will need a variety of screws, m1.4x4mm, m1.4x6mm, m1.4x8mm and m1.4x10mm NOT included. See the video linked below for more information and instructions.

• Extras/Nice to Haves
  • CowRC Udder Butter Grease
  • Mofo RC 0.05" Hex Driver
  • Mofo RC 1.5mm Hex Driver
  • Mofo RC 4mm Nut Driver
  • Side Cutters
  • File/Sandpaper
  • Blue Threadlocker
  • CA Glue

SEE VIDEO HERE FOR MORE INFORMATION