Mofo RC | Dual Motor Transmission Conversion with Brushed Motors (For Axial® SCX24™)

The Mofo RC dual motor transmission conversion with dual 50 sized brushed motors. It is compatible with most SCX24 based chassis kits. Depending on the kit, some may require trimming.

Includes

• Skid Plate of choice
• Aluminum Motor Plate
• Transmission Case
• PH2.0 Y Harness
• Dual 50 Sized Brushed Motor of Choice w/ 14t Mod.3 Pinion Installed
  • TorqueBeast 50 (Brass Pinion)
  • BuzzsawX (Steel Pinion)

Skid Plate Options

• Stock C Channel Rail Compatible
  • Replacement for Rock Rat or any stock chassis if you wish to use the integrated upper link mount hoops.
• Stock C Channel Rail Compatible w/ No Hoops
  • This version requires you to use the chassis upper link mounts.
• Flat Chassis Rail Compatible w/hoops-  
  • This version is compatible with any of our chassis kits that use a flat rail. It has the hoops like our stock C channel version, but it has extra clearance for flat rail chassis kits.

Important Info

• You must provide bearings, screws, and gears from a stock transmission. You can also utilize the internals from our hardened steel bulletproof transmissions.
• Disclaimer: 9mm Nano Motor Compatibility is limited. In order to provide clearances, you must run a 20+ tooth Mod.3 pinion to prevent any rubbing of the motor can on the transmission case. Mofo RC has not thoroughly tested this yet. You must use at your own risk until we can perform adequate testing.