Mofo RC | Lower Link Set (For Axial® SCX30™) - Made In Texas (Pre-Order: Ships by 12/8)

The Mofo RC lower link set provides higher rear clearance than stock and additional weight options for those looking for additional weight down low. These link utilize the stock link balls. 

Weight:

• Aluminum- 2g
• Brass- 6g

Includes

• 2 Front Lower Links
• 2 Rear Lower Links

Install: Remove the front stock link and ball studs. The small link balls will need to be removed from the skid plate side.  BE VERY CAREFUL. These are extremely small. It’s easiest to grab both sides with needle nose pliers and carefully push the plastic off.  Install this side and then move to the axle side. The links are intentionally a tight fit so take your time.  Install the axle side by removing the shock bottom and the ball stud if needed.  It it easier to start with the axle side on the rear so you don’t have to unscrew the ball stud. 

You’ll need to move the rear upper links to the top ball on the ball stud.

Note:

• An o-ring can be added on one side to remove the minimal play you may experience in the links. It isn't necessary given the small size.
• Brass naturally tarnishes over time. They can easily be cleaned or polished for those looking for an updated appearance.