NanoBeast Brushless Motor

New NanoBeast Motor! Smaller than ever, Tons Of Power!

Dimensions, 9mm bolt spacing pattern, 14.6mm diameter, 20.5mm Length, 1.5mm shaft diameter, 9 Slot, 12 Pole, 3200Kv, Weight is 13 grams, Wire length is 160mm, Connector is Ph 2.0 3 pin 

The new NanoBeast is the smallest Brushless motor we have ever offered, But Packs a Giant Wallop. Smaller size for better fit in the tightest of places. At just 14.6mm in diameter and 20.5mm long The dimensions have been re calibrated for optimum power, Speed and Smooth throttle response in the smallest diameter possible. 

Mounting options:

Motor Only, No Gear No Mount

Motor With Mod.3, Mod.4 Or Mod.5 pitch Pinion Gear Plus Nano Forward Facing Aluminum Mount. NO SPUR GEAR - Make sure you know what the different pitch options mean. Mod.3 is the stock gear pitch and most likely what you have. 

Motor with Mod.3 11T pinion gear, Nano LCG standard Motor Mount, The standard mount includes a mod.3 larger 18T White Nylon transfer gear, This gear goes between the pinion and spur gear under the gear cover. 

Experimental Side Mount. - With some creativity and proper clearances slightly filing or sanding down the rear half of the trans case and included gearing you can even get this to fit on the mofo adjustable brushed motor mount as shown in the pictures here using the Included Mofo rc Mod.4 spur gear and Mofo rc mod.4, 12T, 1.5mm steel pinion gear on the motor. Use stock motor screws or included High clearance screws to install motor to plate. That being said, Going to larger gearing with a heavy rig may be prone to some cogging under severe stress. Thats why this is Experimental it wont be for everyone. 

The last option is whether to include a Mofo Rc Rockwolf 32 Bit ESC with your kit, If it says sold out then we are out of escs at that time and youll need to find esc elsewhere.