Big Block and BigBlockX Motors and Forward Facing Mount for Scx24
Big Block and BigBlockX Motors and Forward Facing Mount for Scx24
To Select the BigBlockX rather than normal BigBlock simply add the BigBlock combo of your choice to your cart, Then ALSO ADD the item that says Make it a BigBlockX to your cart as well.
BigBlock motor from Mofo Rc has TONS of Torque and TONs of speed and is 2s or 3s capable and will run on the stock ESC or upgraded ESCs. It is a 130 sized motor and a included forward facing aluminum mount that will fit in the scx24 with a little modification to the Esc Tray and relocation of the ESC. This motor combo can face forward or rearward depending on the orientation of the skid plate.
BigBlockX Looks the same, But has an X at the end of the laser inscription, It does not have as good of a low speed resolution as the BigBlock motor, The X is Faster and has Massive Neodymium Magnets that give it insane torque but at the cost of less low speed control on takeoff. This can be mostly solved by using a better aftermarket ESC Such as the Furitek, Mofo RockWolf Esc or Dinky Esc. Or if you just wanna go fast and have tons of power you can run it on the stock esc.
This motor will mount in several different mounts, That being said depending on the mount you may or may not need to either remove the pins from the motor wire connector and swap them from one side to the other or if you have a throttle reverse function on your remote or esc you may need to reverse the direction from the remote or esc.
The Aluminum FF Mount will come in a few options in both mod.3 stock pitch and aftermarket mod.5 pitch if you have a different than stock spur gear.
The 2 Crawler spec options come with the forward facing mount and either a 16T Brass pinion gear that is mod.3 or if you have a steel spur gear an 18T mod.3 Steel pinion gear. The 16T would have the best crawl speed out of all the others listed.
The 2 other options will still crawl decent but not as good as the crawler spec. These would be better suited for something looking for wheel speed. The 24T mod.3 stock pitch and the 14T mod.5 aftermarket pitch, Both of these options have Steel pinion gears installed.
Brushed motors have a 30 day warranty against defects.
See youtube video here for speed demonstrations of this and other motors from mofo rc.