Mofo RC | VinToy Lightweight Nylon Comp Body (For Axial® SCX30™) - Made in Texas

The VinToy Comp Body was designed as a direct-fit body for our any of our chassis kits such as the Cyber Snake and Pocket Snake 2.0 when using our magnet mount braces. It is set up to utilize both stock and rear extended wheelbase setups such as our +6 links on our Cyber Snake. They are also over 1/2-1/3rd the weight of the stock body reducing much of the high center of gravity causing excess flip overs.

Features:

• High approach and departure angles
• Pinched Bed
• Compatible with up to 42mm tires
• Minimalist interior featuring headrests, dash and steering wheel
  • Headrests feature a screw hole to attached your favorite Lego® figure (not included). Note that you will need to cut the body down to fit above the transmission.
• Ready-to-Paint or Ready for Weathering
  • Fully sand-able & paintable with any plastic-compatible paint you'd prefer.
  • By nature of the production process, the body does have a slight texture to it. It can be primed or sanded to a very fine finish if that is preferred before painting.
• 6mm x 1.4mm magnet holes w/ anti-slide tabs (Magnets Included)
  
  • Prevents the body from shifting forward and back leading to the body coming off the car easily
• Compatible with:
  • Mofo RC Cyber Snake, Pocket Snake 2.0, Modzilla 2.0
    • Must use magnet mounts now included with all chassis kits 
    • Pocket Snake 1.0 & Modzilla 1.0 Magnet Mounts Available Soon
  • Universal Fitment: Magnet Mounts line up with stock chassis braces. many builders can glue magnets to these. You will need to remove the stock lights.
• Weight: 17g with magnets
• Material: Nylon 12 Tough

Includes

• 1 x VinToy Nylon Comp Body
• 10 x 6mm x 1.4mm Magnets