These are steering knuckles for the Trx4m, They are Brass coated Black and add appx 14 grams of weight to the front axle nice and low and non rotational. Includes installation hardware and bushings
The bushings can be tough to install, Use a small non marring punch if needed. But ensure they are centered and straight before installing.
The new Screws will be somewhat tight when installing. Use a quality tool and Turn the screw with purpose. Dont go slow and easy. When bushings are installed 1 per screw install till stops then back off a half turn so steering works nice and easy, If the screws install easy then remove and use loctite on the screw.
